On 10/19/2010 06:12 PM, Jargalan Nermunkh wrote: >> You mean without the patches mentioned above, I mean the unpachted >> 2.6.35.x, your can controller was missing frames? After applying these >> patches that problem was fixed?
> That is correct. The patch added proper handling of RX1 when there is a > rollover from RX0 to RX1. Hmmm, does it? But it's good as it improves your situation. >> Can you ensure with a 3rd system, preferred with a different CAN core, >> that the frames send to the bus are correct? > I connected a board to a lawicel CAN dongle and receiving on the board > (sending from dongle) is fine but sending (with cangen) from the board to > the dongle produces repeated frames. We're talking about sending on the mc251x? This is even a different problem. >> Which driver is active in your setup? Does this happen with both >> versions of the driver? >> > > I am currently using the inline driver. What do you mean? Are you using net-next-2.6/master with my series applied or 2.6.35.x? cheers, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
