On Fri, 13 Dec 2002, Bruno wrote:
> /Proc/bus/usb says:
>
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=e4916000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=06b9 ProdID=4061 Rev= 2.00
> S: Manufacturer=ALCATEL
> S: Product=Speed Touch 330
> S: SerialNumber=0090D074EAD1
> C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms
> I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=87(I) Atr=01(Isoc) MxPS= 640 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=87(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
> B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=e4914000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=03eb ProdID=3301 Rev= 3.00
> S: Product=Standard USB Hub
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 64mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
> T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=04a9 ProdID=106a Rev= 1.03
> S: Manufacturer=Canon
> S: Product=S200
> S: SerialNumber=407PRJ
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
> E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> Only the canon printer is connected on the hub,. the modem directly on a
> normal usb.
>
> The commands I give as root are:
> modem_run -v 2 -m -f /home/bruno/mgmt.o
> pppd call adsl
>
> I hope you can help me, and my excuses to Martin Drautzburg who started the
> Deutsche Telecom conversation. ( I live in Holland but have simular
> problems )
>
Somethings not right here.
at least some of those lines that say driver=(none) should say
driver=usbdevfs (or something like that)
There is a line somethine like mount -t usb /proc/bus/usbdevfs
(Sorry, I'm really busy at the moment and haven't got time to look
it up) which might help.
Regards,
Tim.
--
God said, "div D = rho, div B = 0, curl E = - @B/@t, curl H = J + @D/@t,"
and there was light.
http://tjw.hn.org/ http://www.locofungus.btinternet.co.uk/
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
