hi, Did you try to launch modem_run and pppoa3 with both -e 1 options (that comes with latest CVS version of the driver) ?
On 12 Dec 2002 08:42:39 +0100 Martin Drautzburg <[EMAIL PROTECTED]> wrote: > Is anybody using pppoatm with an alcatel Speedtouch in Germany with T-DSL ? > > I have the following symptoms: > > 1. modem_run alcaudsl.sys runs fine, modem syncs > > 2. when running pppd call myProvider I get > > Dec 12 00:42:03 beaureve pppd[2083]: pppd 2.4.1 started by root, uid 0 > Dec 12 00:42:03 beaureve pppd[2083]: speed 2 not supported > Dec 12 00:42:03 beaureve pppd[2083]: using channel 6 > Dec 12 00:42:03 beaureve pppoa3[2084]: PPPoA3 version 1.1 started by root >(uid 0) > Dec 12 00:42:03 beaureve pppoa3[2084]: Control thread ready > Dec 12 00:42:03 beaureve pppoa3[2084]: Modem found! > Dec 12 00:42:03 beaureve pppd[2083]: Using interface ppp0 > Dec 12 00:42:03 beaureve pppd[2083]: Connect: ppp0 <--> /dev/pts/0 > Dec 12 00:42:03 beaureve pppoa3[2086]: ppp(d) --> pppoa3 --> modem stream >ready > Dec 12 00:42:03 beaureve pppoa3[2087]: modem --> pppoa3 --> ppp(d) stream >ready > Dec 12 00:42:04 beaureve pppd[2083]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> ><pcomp>] > Dec 12 00:42:31 beaureve last message repeated 9 times > Dec 12 00:42:34 beaureve pppd[2083]: LCP: timeout sending Config-Requests > > 3. It seems that pppd does not find anyone to talk to. In fact when I > replace in /etc/ppp/peers/myProvider the line > > pty "/usr/local/sbin/pppoa3 -m 1 -c -vpi 1 -vci 32 -v 0 > by > > pty "sleep 30" > > I get the exact same results > > 4. Sometimes (after a reboot) I see something worrying: > Dec 11 18:32:23 beaureve pppoa3[3893]: Cell had wrong VPI(191)/VCI(32) >(OAM?) PTI=0x01 > > > 5. I am puzzeled by the fact the the module pppoatm is not loaded. I > did load it manually but it makes no difference. Aren't we doing > ppp-over-atm here ? > > 6. Is it a problem if the ISDN system is running (ipppd running) ? It > actually makes not difference though. > > 7. Here is my configuration: > Alcaltel Speedtouch USB > Linux kernel 2.4.17 > pppd version 2.4.1 > DSL Provider: Deutsche Telekom > Internet Provider: Tiscali > > 8. loaded modules > isdn_bsdcomp 5680 0 > usb-uhci 21376 0 (unused) > usbcore 49472 1 [usb-uhci] > n_hdlc 6224 1 > ppp_synctty 4832 1 > ppp_generic 14704 3 [ppp_synctty] > slhc 4608 0 [ppp_generic] > vmmon 18112 0 (unused) > ipt_state 608 1 (autoclean) > ip_conntrack 13248 1 (autoclean) [ipt_state] > ipt_LOG 3120 1 (autoclean) > iptable_filter 1728 0 (autoclean) (unused) > ip_tables 10560 3 [ipt_state ipt_LOG iptable_filter] > sg 24032 0 (unused) > ide-scsi 7568 0 > cdrom 28896 0 (unused) > scsi_mod 80480 2 [sg ide-scsi] > rtc 5536 0 (autoclean) > reiserfs 153728 1 (autoclean) > apm 9568 1 > hisax 178032 10 > isdn 90080 12 [isdn_bsdcomp hisax] > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d_sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
