I'm sorry, I think I hijacked the conversation from Martin Drautzburg, Anyway, to answer your questions:
/var/log/messages says: Dec 13 15:23:09 localhost gconfd (root-2462): starting (version 1.2.1), pid 2462 user 'root' Dec 13 15:23:09 localhost gconfd (root-2462): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0 Dec 13 15:23:09 localhost gconfd (root-2462): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1 Dec 13 15:23:09 localhost gconfd (root-2462): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2 Dec 13 15:24:25 localhost modem_run[2496]: modem_run version 1.1 started by bruno uid 0 Dec 13 15:24:25 localhost modem_run[2496]: Found ALCATEL SpeedTouch USB modem Dec 13 15:24:25 localhost modem_run[2496]: Unable to locate microcode Dec 13 15:24:48 localhost modem_run[2497]: modem_run version 1.1 started by bruno uid 0 Dec 13 15:24:48 localhost modem_run[2497]: Found ALCATEL SpeedTouch USB modem Dec 13 15:24:48 localhost modem_run[2497]: Best offset 6463 with probability 100% Dec 13 15:24:48 localhost modem_run[2497]: Best offset 526179 with probability 100% Dec 13 15:24:50 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:24:50 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 Dec 13 15:24:50 localhost modem_run[2497]: BLOCK1 : 991 bytes uploaded : OK Dec 13 15:24:51 localhost modem_run[2497]: BLOCK2 : 511 bytes downloaded : OK Dec 13 15:24:52 localhost modem_run[2497]: BLOCK3 : 526187 bytes uploaded : OK Dec 13 15:24:52 localhost modem_run[2497]: Downloaded in 1427.415000 ms Dec 13 15:24:52 localhost modem_run[2497]: BLOCK4 : 511 bytes downloaded : OK Dec 13 15:24:53 localhost modem_run[2497]: Modem reference : 3EC36656AAAA01 Dec 13 15:25:17 localhost modem_run[2499]: Received interrupt, len = 6 Dec 13 15:25:17 localhost modem_run[2497]: ADSL synchronization has been obtained Dec 13 15:25:17 localhost modem_run[2497]: Modem State Dec 13 15:25:17 localhost modem_run[2497]: ADSL line is up (256 kbit/s down | 64 kbit/s up) Dec 13 15:25:32 localhost pppd[2501]: pppd 2.4.1 started by root, uid 0 Dec 13 15:25:32 localhost pppoa3[2502]: PPPoA3 version 1.1 started by root (uid 0) Dec 13 15:25:32 localhost pppoa3[2502]: Control thread ready Dec 13 15:25:32 localhost pppd[2501]: Using interface ppp0 Dec 13 15:25:32 localhost pppd[2501]: Connect: ppp0 <--> /dev/pts/2 Dec 13 15:25:32 localhost kernel: HDLC line discipline: version $Revision: 3.3 $, maxframe=4096 Dec 13 15:25:32 localhost kernel: N_HDLC line discipline registered. Dec 13 15:25:32 localhost pppoa3[2516]: ppp(d) --> pppoa3 --> modem stream ready Dec 13 15:25:32 localhost pppoa3[2517]: modem --> pppoa3 --> ppp(d) stream ready Dec 13 15:25:32 localhost /etc/hotplug/net.agent: assuming ppp0 is already up Dec 13 15:25:34 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:34 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:37 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:37 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:40 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:40 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:43 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:43 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:46 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:46 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:49 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:49 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:52 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:52 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:55 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:55 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:25:58 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:25:58 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:01 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:01 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:03 localhost pppd[2501]: LCP: timeout sending Config-Requests Dec 13 15:26:03 localhost pppd[2501]: Connection terminated. Dec 13 15:26:03 localhost pppoa3[2516]: Error reading from pppd Dec 13 15:26:03 localhost pppoa3[2502]: Woken by a sem_post event -> Exiting Dec 13 15:26:03 localhost pppoa3[2502]: Write to ppp Canceled Dec 13 15:26:03 localhost pppoa3[2502]: Exiting Dec 13 15:26:03 localhost pppd[2501]: Using interface ppp0 Dec 13 15:26:03 localhost pppd[2501]: Connect: ppp0 <--> /dev/pts/3 Dec 13 15:26:03 localhost pppoa3[2522]: PPPoA3 version 1.1 started by root (uid 0) Dec 13 15:26:03 localhost pppoa3[2522]: Control thread ready Dec 13 15:26:03 localhost pppoa3[2527]: ppp(d) --> pppoa3 --> modem stream ready Dec 13 15:26:03 localhost pppoa3[2528]: modem --> pppoa3 --> ppp(d) stream ready Dec 13 15:26:03 localhost /etc/hotplug/net.agent: NET unregister event not supported Dec 13 15:26:03 localhost /etc/hotplug/net.agent: assuming ppp0 is already up Dec 13 15:26:05 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:05 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:08 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:08 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:11 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:11 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:14 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:14 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:17 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:17 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:20 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:20 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:23 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:23 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:26 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:26 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:29 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:29 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:32 localhost kernel: usb_control/bulk_msg: timeout Dec 13 15:26:32 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Dec 13 15:26:34 localhost pppd[2501]: LCP: timeout sending Config-Requests Dec 13 15:26:34 localhost pppd[2501]: Connection terminated. Dec 13 15:26:34 localhost pppoa3[2527]: Error reading from pppd Dec 13 15:26:34 localhost pppoa3[2522]: Woken by a sem_post event -> Exiting Dec 13 15:26:34 localhost pppoa3[2522]: Write to ppp Canceled Dec 13 15:26:34 localhost pppoa3[2522]: Exiting Dec 13 15:26:34 localhost pppoa3[2542]: PPPoA3 version 1.1 started by root (uid 0) Dec 13 15:26:34 localhost pppoa3[2542]: Control thread ready Dec 13 15:26:34 localhost pppd[2501]: Using interface ppp0 Dec 13 15:26:34 localhost pppd[2501]: Connect: ppp0 <--> /dev/pts/2 Dec 13 15:26:34 localhost pppoa3[2547]: ppp(d) --> pppoa3 --> modem stream ready Dec 13 15:26:34 localhost pppoa3[2548]: modem --> pppoa3 --> ppp(d) stream ready Dec 13 15:26:34 localhost /etc/hotplug/net.agent: NET unregister event not supported Dec 13 15:26:34 localhost /etc/hotplug/net.agent: assuming ppp0 is already up Dec 13 15:26:34 localhost pppoa3[2547]: Error reading from pppd Dec 13 15:26:34 localhost pppoa3[2542]: Woken by a sem_post event -> Exiting Dec 13 15:26:34 localhost pppoa3[2542]: Read from ppp Canceled Dec 13 15:26:34 localhost pppoa3[2542]: Write to ppp Canceled Dec 13 15:26:34 localhost pppoa3[2542]: Exiting Dec 13 15:26:35 localhost /etc/hotplug/net.agent: NET unregister event not supported Dec 13 15:27:09 localhost gconfd (root-2462): GConf server is not in use, shutting down. Dec 13 15:27:09 localhost gconfd (root-2462): Exiting /Proc/bus/usb says: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e4916000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 2.00 S: Manufacturer=ALCATEL S: Product=Speed Touch 330 S: SerialNumber=0090D074EAD1 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=01(Isoc) MxPS= 640 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e4914000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03eb ProdID=3301 Rev= 3.00 S: Product=Standard USB Hub C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 64mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04a9 ProdID=106a Rev= 1.03 S: Manufacturer=Canon S: Product=S200 S: SerialNumber=407PRJ C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Only the canon printer is connected on the hub,. the modem directly on a normal usb. The commands I give as root are: modem_run -v 2 -m -f /home/bruno/mgmt.o pppd call adsl I hope you can help me, and my excuses to Martin Drautzburg who started the Deutsche Telecom conversation. ( I live in Holland but have simular problems ) Bruno ----- Original Message ----- From: "christine noot-huyghe" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, December 13, 2002 2:38 PM Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom > > Well, it is certainly not necessary to reinstall your system. > Are you sure that you launch the right modem_run version (not the one > coming with Mandrake 9.0, which is older and does not work with > st330 ?) > You should maybe post here: what you are exactly typping and > what the /var/log/messages says. > > Christine. > > On Fri, 13 Dec 2002 10:13:02 +0100 > "Bruno" <[EMAIL PROTECTED]> wrote: > > > > > That's right it does complain about invalid arguments.! > > I'm thinking about weather I should start all over again, formatting the > > harddrive and installing Mandrake from scratch. Because perhaps after all > > the diffrerent versions of drivers I did install, something went wrong . . . > > or > > would that be a waste of time ? > > One question is: with a new install of 9.0, should I try to configure the > > modem during the install process at all, or completely skip that part and > > start with Benoit Papillault's instructions after the OS is running ? > > > > Bruno > > > > ----- Original Message ----- > > From: "Frans J King" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, December 13, 2002 6:44 AM > > Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom > > > > > > > > > > How do you mean it does not work? Do you mean that you can't connect or > > > do modem_run and pppoa3 complain about invalid arguments? > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > > > On Behalf Of Bruno > > > Sent: 13 December 2002 01:45 > > > To: [EMAIL PROTECTED] > > > Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom > > > > > > > > > Does not work, the -e 1 switch > > > > > > Bruno > > > > > > ----- Original Message ----- > > > From: "Frans J King" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Friday, December 13, 2002 2:05 AM > > > Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom > > > > > > > > > > > > > > Yes. You need the -e 1 switch. > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > > > > On Behalf Of Bruno > > > > Sent: 13 December 2002 00:29 > > > > To: [EMAIL PROTECTED] > > > > Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom > > > > > > > > > > > > I've got the same problem in mandrake 9.0 with the 330 modem. > > > > Is the CVS suited for the SpeedTouch 330 ? > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Martin Drautzburg" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Thursday, December 12, 2002 11:38 PM > > > > Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom > > > > > > > > > > > > > christine noot-huyghe <[EMAIL PROTECTED]> writes: > > > > > > > > > > > hi, > > > > > > > > > > > > Did you try to launch modem_run and pppoa3 with both -e 1 options > > > > > > (that comes with latest CVS version of the driver) ? > > > > > > > > > > Just did. No difference. > > > > > > > > > > > > > > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > > > Pour se d�sinscrire : > > > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > > Pour se d�sinscrire : > > > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > > > > > > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > > Pour se d�sinscrire : > > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > > > > > > > > > > > > > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > Pour se d�sinscrire : > > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > Pour se d�sinscrire : > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > > > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > > > > -- > +--------------------------------------------------------------------------- -+ > |Christine Noot-Huyghe courriel:[EMAIL PROTECTED] | > |Institut Math�matique (o- tel:(33)02 23 23 62 12 | > |Universit� de Rennes1 //\ fax:(33)02 23 23 67 90 | > |Campus de Beaulieu V_/_ http://www.maths.univ-rennes1.fr/~huyghe | > |35042 Rennes cedex FRANCE | > +--------------------------------------------------------------------------- -+ > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
