Hi Gilles,
> I have some problem to reproduce the message and wmem leakage is not
> written in the log.
> What should I change in the syslog.conf to write this message in the log?
> For the message 'kernel: vcc-sock_destruct: wmem leakage ( bytes) , I saw
> mostly 932 value, sometime more like 2632 or 5012
try
echo 8 > /proc/sys/kernel/printk
> I have not seen before but it is correlated with EMI message when the modem
> is reset for unknow reason.
> Don't somebody else saw this sort of 'disabled by hub (EMI?),
> re-enabling...' message wich do a partial modem reset?
> Most of the time with pppoa3, the firmware stay in the modem, so an usb
> reset is necessary to reconnect but it's may not the case for kernel
> driver.
Do you also get it if you unplug the modem?
> It is understandable that there is some problem due to this desorderly
> modem reset but it's may more related to 'pppd[721]: connect(8.35): No such
> device' than the speedtch module.
Well, I have no idea yet. I don't see how reseting the modem could cause
problems for the module. I will try to find out what this EMI message means.
Ciao,
Duncan.
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
