Jack, I appreciate your comments. You are pointing out a few things that I would not have thought about in determining the classification of this building. I do know that what does get stored there should not increase dramatically since it's storage for the maintenance garage but that doesn't mean that other items won't be introduced or accumulated over time. I also have to work with a flow test that shows 1100 gallons at 20 PSI available too. I need to make a fire pump work also.
General question to the group. Could ESFR sprinklers be used in my application? I have no experience with them (as a reminder, I can't get to the archives which is not helping in my quest). Richard Richard K. Lindner Plumbing Senior Designer Morris, Johnson & Associates, Inc. 611 Industrial Way West Eatontown, New Jersey 07724 P: 732-380-1100 ext. 4186 | F: 732-380-1111 [EMAIL PROTECTED] www.morrisjohnson.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Kilavuz Jack - Sydney-MHA Sent: Tuesday, February 06, 2007 7:22 PM To: [email protected] Subject: RE: Determining a Warehouse Commodity Classification Richard I always have difficulty with two terms "temporary" and "small". "Small" enough that I would not consider would be probably one or two pallet load of aerosols in total, even then I would suggest these be put in a drawer or something (Have you seen a rocketing aerosol can on fire? It flies a good 20-30 ft). Any more, I would allow for them, as Matt already stated "I have never seen a "spec" warehouse stay the way the owner/developer described it. After the job is done, many liberties will be taken, of which YOU did not make them aware, (height, location, type, etc..) Be sure you document well.....". These specs given won't stay same forever, and they maybe "temporarily" increased for Christmas sales, end of year sales, etc. Cheers Jack Jack C Kilavuz Risk Engineer - Underwriter Munich Reinsurance Group in Australasia 143 Macquarie Street Sydney NSW 2000 Australia T +61 2 9272 8078 | F +61 2 9272 8133 | M +61 419-898-365 E mailto:[EMAIL PROTECTED] CAUTION: This message is intended only for the named addressee. It is confidential and may be legally privileged. If you are not the intended recipient, any disclosure, copying, or distribution is prohibited and may be unlawful. By opening any attachment, you agree that the Munich Re Group will not be liable for any loss resulting from viruses or other defects. Any views in this message are those of the individual sender, except where the sender expressly and with authority states them to be the views of the Munich Re Group. The Munich Re Group will not be liable for any action taken, or omitted to be taken, in reliance upon the contents of this message -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lindner, Richard Sent: Wednesday, February 07, 2007 10:33 AM To: [email protected] Subject: RE: Determining a Warehouse Commodity Classification I would consider the amount of aerosal cans, etc to be small in the overall scheme or am I thinking incorrectly and any amount should be considered? Richard K. Lindner Plumbing Senior Designer Morris, Johnson & Associates, Inc. 611 Industrial Way West Eatontown, New Jersey 07724 P: 732-380-1100 ext. 4186 | F: 732-380-1111 [EMAIL PROTECTED] www.morrisjohnson.com -----Original Message----- _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
