When protecting an elevator shaft of a (Otis Gen 2) or Kone (Eco Space) type
elevator where the elevator equipment is contained in the shaft is
protection at top and bottom of the shaft required if the shaft is of
non-combustible construction?
Would Shunt trips (Flow Switch or heat detector operated) be required for
both heads (locations) , or just the top of shaft location?
My initial thoughts are both top and bottom for heads, and just top of heat
detector.
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
