Hydra Calc can be bought and used stand alone I believe. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roland Huggins Sent: Monday, May 14, 2007 6:30 PM To: [email protected] Subject: Re: Anyone have experience with Elite Fire
It assigns the area of coverage for ALL heads in the remote area by dividing the size by the number of heads. I quit looking at it as a serious program at that point. Actually I heard they dropped their hydraulic program. They are mechanical engineers and that is the focus of their primary software. As a stand alone (non-cad) program what else is out there? I am aware of (and have used) THE hydraulic program. Roland On May 14, 2007, at 2:28 PM, <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> wrote: > Does anyone have any experience with the Elite Fire? > > We're supposed to be looking at it in place of HASS. > > > Craig L. Prahl, CET > Fire Protection Group > Mechanical Department > CH2MHILL > Lockwood Greene > 1500 International Drive > PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - > 864.599.8439 [EMAIL PROTECTED] http://www.lg.com > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:Sprinklerforum- > [EMAIL PROTECTED] (Put the word unsubscribe in the subject > field) > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
