Unistrut will not work for most trapeeze, section modulus is very low. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G. Tim Stone Sent: Monday, July 23, 2007 8:59 AM To: [email protected] Subject: RE: Section moduli of Unistrut
Travis, Check out the following link to Power Strut: http://www.powerstrut.com/psjan2005/fibergl182.jpg G. Tim Stone NICET Level III Engineering Technician Fire Protection Sprinkler Design and Consulting Services 117 Old Stage Rd. - Essex Jct., VT. 05452 TEL: (802) 434-2968 Fax: (802) 434-4343 [EMAIL PROTECTED] > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:sprinklerforum- > [EMAIL PROTECTED] On Behalf Of Travis Mack > Sent: Monday, July 23, 2007 8:29 AM > To: [email protected] > Subject: Section moduli of Unistrut > > Does anyone have a datasheet or link to download one for Unistrut (or > something similar) that gives the section modulus. We need to size > some unistrut for trapeze hangers. I remember a table in the unistrut > catalogues from many years ago, but can't find it any more. > > Thanks for your help. > > Travis > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email > to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
