We have a note in our specifications as to which one takes precedence. I would suggest contacting the originator of the documents for clarification. They need to clean up the conflict, you shouldn't have to try and figure it out.
Craig L. Prahl, CET Fire Protection Specialist Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.ch2m.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Russell Sent: Thursday, December 04, 2008 8:31 AM To: AFSA Subject: Spec's. vs. Drawings Good mornin'. I have always been under the impression that the contract drawings for a project take precedence over the specifications. This was just passed down from my early involvement in the trade and have never seen this documented. Is there anything anywhere that this is on paper like "Engineering For Dummies" or "So You Want To Be An Architect", etc.? I have a conflict between the two. Russell Rewis Brown Automatic Sprinklers, Inc. 107C Hemlock Street Valdosta, Georgia 31601 229-244-8130 [EMAIL PROTECTED] _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [EMAIL PROTECTED] To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [EMAIL PROTECTED] To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
