Good morning George. The tag on the pressure relief valve says 175 PSI, I
only saw one part number on the Tyco site. The pressure valve did not look
adjustable.
Douglas Hicks
General Fire Equipment Co of Eastern Oregon, Inc
----- Original Message -----
From: "George Church" <[email protected]>
To: <[email protected]>
Sent: Friday, January 23, 2009 5:28 AM
Subject: RE: pressure relief valve
You can't just "remove" them - be serious.
If pressure is over the factory setting, then a REPLACEMENT of the 300#
adjustable model is available and you crank it down to 200 PSI and end the
drip.
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.12/1911 - Release Date: 1/23/2009
7:28 AM
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
