We install our tank thermometers in thermowells. Can save a LOT of water when changing out.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Thom McMahon Sent: Thursday, February 25, 2010 12:22 PM To: [email protected] Subject: RE: Plans and Specs? Craig is right on this one. Thermal wells allow monitoring of the fluid temp. inside of piping, usually industrial process piping where temp. can be extremely important. Additionally "Back Welding" is a process piping "Stop Leak" solution. Usually pipe containing fluid that is very viscosity / Temp. sensitive, like oil. Thom McMahon, SET Firetech, Inc. 2560 Copper Ridge Dr P.O. Box 882136 Steamboat Springs, CO 80488 Tel: 970-879-7952 Fax: 970-879-7926 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, February 25, 2010 9:46 AM To: [email protected] Subject: RE: Plans and Specs? Sounds like someone was using a process piping spec. Thermo wells are typically used for temperature probes or monitors. Back welding threaded pipe is another process related procedure. Neither of these apply to fire protection. Craig L. Prahl, CET Fire Protection Specialist Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [email protected] http://www.ch2m.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Eric Tysinger Sent: Thursday, February 25, 2010 11:31 AM To: [email protected] Subject: Plans and Specs? Good afternoon all (or morning to some), We have a job (plans and specs) we are looking at, wet and dry systems. Has anyone ever run into an engineer spec'ing thermo wells? What about the phrase "All threaded process piping to be back welded." Thanks, Thanks, Eric Tysinger CET NICET III - 108988 Designer Wayne Automatic Fire Sprinklers, Inc. 4370 Motorsport Drive Concord, NC 28027 p: (704)782-3032 f: (704)795-6838 C: (239)633-9703 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
