The hose allowance is normally taken at the point of connection of any
device that will use the water (hose connection,hydrant,etc.).
Lamar Vaughn,SET
On Tue, Feb 22, 2011 at 1:35 AM, [email protected] wrote:
Hi.
I remember that the hose allowance is added in the hydraulic
calculation in
the node where the remote area ends over the cross main.
Some people tell me that should be at the base of riser. We just
purchase
AutoSpring and the software do this addition on the pump room
What is the way this should be?
Regards!
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email
to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
