Hi all, When protecting LPG vessels, one has to ensure that the surfaces of the tanks are fully wet, taking cognisance of vessel supports, etc.
I am looking at a water spray system being designed to protect a loading area for an LPG Tanker. I'm concerned about the area beneath the tanker, and especially at the areas shielded by wheels, etc. Wondering if anyone has been involved in a similar installation and if so, how these areas were dealt with. Thanks Chris Mak | Aon New Zealand Sprinkler Certification Manager Level 1, 4 Fred Thomas Drive,;PO Box33-1240 Takapuna t: +6494869761 | f: +6494860112 | m: +64274344058 e: [email protected] Please consider the environment before printing this email. This communication (and any attachments) is directed in confidence to the addressee(s) listed above, and may not otherwise be distributed, copied or used. The contents of this communication may also be subject to privilege, and all rights to that privilege are expressly claimed and not waived. If you have received this communication in error, please notify us by reply e-mail or by telephone and delete this communication (and any attachments) without making a copy. Before opening or using attachments, you should check them for viruses and defects. We do not accept liability in connection with computer virus, data corruption, delay, interruption, unauthorised access or unauthorised amendment. _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
