We have, in the past, taken the appropriate sized pipe and used a plasma cutter to split it in half, being sure to cut a notch in each side. The notch helps hold the two pieces together when put over the pipe being sleeved and slid into the wall.
Mike Hill -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dewayne Martinez Sent: Friday, June 03, 2011 9:57 AM To: [email protected] Subject: pipe sleeves We have a job with existing pipe that the spec is requiring sleeves for all new block walls. There will be plenty of existing 1" and 1 1/4" pipe penetrating these new walls. What is the best way to sleeve existing small pipe? Thanks, Dewayne Martinez Design Build Fire Protection New Berlin, WI _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
