If there is no spec. for the sleeve material, I prefer the saran wrap sleeve, for its ease of installation and flexibility. I find that the one that wrapped my sandwich is usually good for two or three 1" or 1-1/4" pipes.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ed Kramer Sent: Friday, June 03, 2011 8:21 AM To: [email protected] Subject: RE: pipe sleeves Must the sleeve be steel? If not, maybe plastic pipe that's been slit along one side. Ed Kramer Littleton, CO > > We have a job with existing pipe that the spec is requiring sleeves for > all new block walls. > There will be plenty of existing 1" and 1 1/4" pipe penetrating these > new walls. What is the > best way to sleeve existing small pipe? > Thanks, > Dewayne Martinez > Design Build Fire Protection > New Berlin, WI > _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
