What activates the head and how is it reset? In a message dated 1/4/2012 3:52:56 P.M. Eastern Standard Time, [email protected] writes:
That sounds more like a "wash down" sprinkler used to clean the chute. Jamie Sent from my iPhone On Jan 4, 2012, at 2:46 PM, [email protected] wrote: > I had a sprinkler head go off at the top of a trash chute today. The head > is in an unreachable position inside the middle the top of the chute. It is > also being fed off some kind of contraption I have never seen. Some type > of large baffle with a 1" street elbow coming off of it and something in the > middle with a lever. There are heads on every floor, just inside the trash > chute doors, which is common. Does anybody know what type of assembly this > is at the very top center of the chute? How can I possible change this head > if I can't even get near it? I broke the 1" union feeding this contraption > which was located outside the chute. I just plugged it and need to figure > out where to go from here. Any help would be greatly appreciated. > Thanks, > Dave > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <http://fireball.fires prinkler.org/mailman/private/sprinklerforum/attachments/20120104/ae07e458/attachment.html> > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20120104/e5c1912a/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
