I agree. I am going to have to go back and do a little further  
investigation. Maybe a picture would help.
 
In a message dated 1/6/2012 2:58:02 P.M. Eastern Standard Time,  
[email protected] writes:

If it is  a cleanout head then it should have its own domestic supply and
should not  be tied into the sprinkler system - if it is tied to it, then
someone had  to open the valve manually supplying this head and it should
have happened  before this if it has been like this for 30 years.

Bobby Gillett
Sr.  Project Manager
Key Fire Protection, Inc.
(731) 424-0130 office   (731) 424-9285 fax 
(731) 267-4853  cell
www.keyfireprotection.com

-----Original Message-----
From:  [email protected]
[mailto:[email protected]]  On Behalf Of
[email protected]
Sent: Friday, January 06, 2012 1:52  PM
To: [email protected]
Subject: Re: Trash Chute  Question

But if it was designed as a cleanout head, I would think there  would no  
fusible link. Otherwise you would have to fuse the head to  clean the  
chute?


In a message dated 1/6/2012 2:23:02 P.M.  Eastern Standard Time,  
[email protected] writes:

That  may  be why it actuated - the fact that it is 30 years old.  It sat  
at
the  top of an unairconditioned chute where all the  environmental  heat
collects.  It is subject to vibration day  after day from trash  banging 
down
the chute.  It's old.   Fatigue sets in.  The  fusible link just gave up.

John  Hoffman P.E. | Fire Protection Engineer  | Facility  Engineering
Services, KCP, LLC - Burns & McDonnell  Engineering |  National Nuclear
Security Administration's Kansas City Plant  |  Operated by Honeywell FM&T |
2000 E. 95th St | Kansas City,  MO   64131 | ph 816-997-7213   |
[email protected]


|------------>
| From:    |
|------------>
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|[email protected]    |
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|------------>
|   To:         |
|------------>
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|[email protected]    |
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|------------>
|   Date:       |
|------------>
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|01/06/2012  01:13 PM                    |
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|------------>
|   Subject:    |
|------------>
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|Re:  Trash Chute Question                  |
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|------------>
|   Sent by:    |
|------------>
>---------------------------------------------------------------------------
-------------------------------------------------------------|
|[email protected]    |
>---------------------------------------------------------------------------
-------------------------------------------------------------|





That   has been one of my theories. My only question is what caused the   
head

to go off now. It's been that way for 30 years and they've  never  had any
problems. I'm still confused .


In a message  dated  1/6/2012 9:12:49 A.M. Eastern Standard  Time,
[email protected]  writes:

Sounds  like a  "cleanout head", that should've been  connected to  domestic
water  supply, was incorrectly connected to the  fire  system during
original
construction. The head should be an open   head, controlled by a  valve at
the
top of the shaft. It  shouldn't  set off the pump or fire  alarm.

On Wed, Jan 4,  2012 at 2:46 PM,  <[email protected]>  wrote:

> I had  a sprinkler head go off  at the top of a trash chute  today.  The
head
> is in an  unreachable position inside the middle  the  top of the  chute.
It
> is
> also being fed off  some kind of   contraption I have never seen. Some 
type
> of  large baffle with a  1"  street elbow coming off of it and something  
in
> the
>  middle with  a lever. There are heads on  every floor, just inside  the
trash
>  chute  doors,  which is common. Does anybody  know what type of assembly
this
>  is at the  very top center of  the chute? How can I possible   change 
this
> head
> if I  can't  even get near it? I  broke  the 1" union feeding  this
contraption
> which  was  located outside  the chute. I  just plugged it and need  to
figure
> out where to go   from  here. Any help  would be greatly appreciated.
> Thanks,
>   Dave
>  -------------- next part --------------
> An HTML   attachment  was scrubbed...
> URL:   <
>
http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments
/20120104/ae07e458/attachment.html

>    >
>  _______________________________________________
>    Sprinklerforum mailing list
>   [email protected]
>    http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
--------------    next part --------------
An HTML attachment was   scrubbed...
URL:
<
http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments
/20120106/f7e15123/attachment.html
>
_______________________________________________
Sprinklerforum    mailing    list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

--------------   next part --------------
An HTML attachment was scrubbed...
URL:   <
http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments
/20120106/aaadd158/attachment.html
>
_______________________________________________
Sprinklerforum   mailing   list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum



_______________________________________________
Sprinklerforum   mailing   list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

--------------  next part --------------
An HTML attachment was  scrubbed...
URL:
<http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment
s/20120106/d103d8e5/attachment.html>
_______________________________________________
Sprinklerforum  mailing  list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

-----
No  virus found in this message.
Checked by AVG - www.avg.com
Version:  2012.0.1901 / Virus Database: 2109/4726 - Release Date:  01/06/12

_______________________________________________
Sprinklerforum  mailing  list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20120106/49218e1d/attachment.html>
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

Reply via email to