You might try using (2) 1/2" plate flanges with 3 gaskets. Sometimes around here they call them irrigation flanges, they are made from 1/2" steel plate and are typically made to weld on to IPS steel pipe, so the I.D. of the flange and the bolt holes are the right size. We have used them typically on Backflow retro fits. Good luck. Bill Cunningham Plumbco Inc. C.E.T.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dewayne Martinez Sent: Wednesday, October 24, 2012 11:58 AM To: SprinklerFORUM Subject: DPV replacement We have to replace 6 existing 6in Star DPV with a 17in takeout. I cannot find another manufacture that has a DPV with the same takeout. The closest is 16in. The original pipe is threaded 6in sch 40 so I would like to leave it alone if possible. Does anyone know of a company that makes 1" thick flange spacer? Any other suggestions? Thanks, Dewayne Martinez Design Build Fire Protection -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment s/20121024/3ba8ff1b/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
