Dewayne, In the past we just took a threaded flange to our local machine shop and had them mill or cut the hub off down to where both sides were flat. It will be close 7/8" to 1". Bob Mahoney
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dewayne Martinez Sent: Wednesday, October 24, 2012 1:58 PM To: SprinklerFORUM Subject: DPV replacement We have to replace 6 existing 6in Star DPV with a 17in takeout. I cannot find another manufacture that has a DPV with the same takeout. The closest is 16in. The original pipe is threaded 6in sch 40 so I would like to leave it alone if possible. Does anyone know of a company that makes 1" thick flange spacer? Any other suggestions? Thanks, Dewayne Martinez Design Build Fire Protection -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment s/20121024/3ba8ff1b/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
