There is no ME for the project and the HVAC contractor who is providing it brought up the question on whether sprinklers are required.
-----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, September 08, 2014 11:32 AM To: [email protected] Subject: RE: fume hood / dust collector - sprinklers in? Quite honestly you should throw this back to the owner/GC to have a mechanical engineer or vendor determine what is required per code. There are several conditions to be considered. Craig L. Prahl Fire Protection Group Lead CH2MHILL Lockwood Greene 1500 International Drive Spartanburg, SC 29303 Direct - 864.599.4102 Fax - 864.599.8439 CH2MHILL Extension 74102 [email protected] -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Dewayne Martinez Sent: Monday, September 08, 2014 7:43 AM To: [email protected] Subject: fume hood / dust collector - sprinklers in? I have a job where they have a small furnace to create molten metal for castings. There is a hood (2x8ft) above the area where they take the used “probes” and clean them off. This duct work goes outside to a dust collector. How do I determine if sprinklers are needed in the hood and ductwork? Thanks, Dewayne _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
