I have a question for the forum at large, and specifically for the NFPA 14 Committee Members. For the forum community "what is the minimum design pressure required for a new class I automatic wet standpipe in your location?" I know what the un-amended code says, but it includes the catch-all qualification about the AHJ being consulted for specific needs. So what I'm looking for is, in your region/area;
1- Does the local fire code accept the NFPA14 requirement for 100 psi minimum operating pressure at the required flow rate? 2 - Does the local fire code amend the NFPA14 requirement from 100 psi to something higher or lower? 3 - Does the local Fire Code Official regulate the NFPA14 requirements without having amended the current fire code, ie, require a higher or lower pressure than the written code? Also, from the NFPA 14 committee, any comments on discussions leading up to the change from 65psi to 100 psi, and your thoughts on the matter will be appreciated. In addition, related comments from the Fire Fighters among us, on actual experience in the "heat of the battle", are most welcome. And lastly, in respect of the Forum Traffic Control officials, please respond to me directly "off forum" at mphe...@aerofire.com<mailto:mphe...@aerofire.com>. Mark at Aero 602 820-7894 Sent from my iPad _______________________________________________ Sprinklerforum mailing list Sprinklerforum@lists.firesprinkler.org http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org