When installing piping through TJI, are you required to provide a hanger
on the piping?
For years in this area, guys drill the TJI and run CPVC through them
without a hanger. A new inspector is now requiring the fitter to go
back and add hangers on a large 4 story building.
What are your thoughts? I was under the impression that installing in
this manner, you are laying the piping on the structure and the
structure is essentially your hanger, so no additional hangers are needed.
--
Travis Mack, SET
MFP Design, LLC
2508 E Lodgepole Drive
Gilbert, AZ 85298
480-505-9271
fax: 866-430-6107
email:[email protected]
http://www.mfpdesign.com
https://www.facebook.com/pages/MFP-Design-LLC/92218417692
Send large files to us via: https://www.hightail.com/u/MFPDesign
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
