The main question is will the CPVC manufacturer not void the warranty on the 
piping without listed hangers? I have been told by at least one that they would 
void the warranty.
 

David Bohannon
205-616-7952

 
 
-----Original Message-----
From: Steve Leyton <[email protected]>
To: sprinklerforum <[email protected]>
Sent: Fri, Aug 28, 2015 2:02 pm
Subject: RE: "HANGING"


9.1.1.6.3:  Holes through solid structural members shall be permitted to
serve
as hangers for th support of system piping provided such holes are
permitted by
applicable building codes and the spacing and support
provisions for hangers of
this standard are satisfied.

Challenge:  Is a composite wood I-joist
considered a solid member?   I
would say not, based on an interp we got years
ago that such members
were not heavy enough to meet the intent of the
definition of panel
construction, i.e. "members capable of trapping
heat".
Notwithstanding my opinion, is the structural engineer of record
willing
to sign for the web material as meeting the load-bearing criteria
of
NFPA 13?    Is the building or fire official willing to hear that
opinion? 
Have you contacted the engineering department of the
joist
manufacturer?

SL





-----Original Message-----
From:
Sprinklerforum
[mailto:[email protected]] On
Behalf Of
Travis Mack, SET
Sent: Friday, August 28, 2015 11:30 AM
To:
[email protected]
Subject: "HANGING"

When installing
piping through TJI, are you required to provide a hanger
on the piping?

For
years in this area, guys drill the TJI and run CPVC through them
without a
hanger.  A new inspector is now requiring the fitter to go
back and add hangers
on a large 4 story building.

What are your thoughts?  I was under the
impression that installing in
this manner, you are laying the piping on the
structure and the
structure is essentially your hanger, so no additional
hangers are
needed.

--
Travis Mack, SET
MFP Design, LLC
2508 E Lodgepole
Drive
Gilbert, AZ 85298
480-505-9271
fax:
866-430-6107
email:[email protected]

http://www.mfpdesign.com
https://www.facebook.com/pages/MFP-Design-LLC/92218417692
Send
large files to us via:
https://www.hightail.com/u/MFPDesign

_______________________________________________
Sprinklerforum
mailing
list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler
.org
_______________________________________________
Sprinklerforum
mailing
list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

 
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to