Cut the problem in half by using half the valves, and none of those fighting a losing battle by being closed? On Dec 14, 2015 4:21 PM, "Charles Thurston" <[email protected]> wrote:
> Hello Brad, > > We have enough trouble in this area getting the maint. guy to drain the > ones with 2 valves they can reach and a hand tight plug in the bottom. IF > we get 3 days below freezing and then a thaw, we will run 40-60 freeze > break calls on the thaw day. > > That reminds me I need to place our annual order of 60- 1" valves. > > Monday, December 14, 2015, 3:43:29 PM, you wrote: > > > I still say we don't need two 1" globe valvles OR any 2" pipe to make a > > Drum Drip. > > How about a 1" globe at 7' AFF, then 6' of 1" down to a 1x1/2 red. with > a > > 1/2" fairly easily removed plug? > > In this way, most would-be tamperers would need a ladder and wrench, and > > honest workers could use the one valve and one plug to acomplish the same > > thing the picture of drum drips in 13 do. > > > Brad > > On Dec 14, 2015 10:40 AM, "Jay Stough" <[email protected]> wrote: > > >> AGF has a nice setup. We recently installed one of their heated drum > drips > >> where the installing contractor put the drum drip outside. Go to: > >> http://www.testandrain.com/documents/products.html#collectandrain > > >> *Jay Stough* > >> NICET IV LAYOUT > >> NICET III ITM > > >> On Mon, Dec 14, 2015 at 10:37 AM, Gregory Lindholm <[email protected]> > >> wrote: > > >> > Has anybody seen where I could get a guard that would keep people from > >> > tampering with drain valves I has seen something quite a few years > ago, > >> but > >> > cannot find out where now. > >> > It does not matter if it attaches to the piping, then a lock > installed on > >> > that, or some type of cage attached to a wall, then a door on that. > >> > > >> > Greg Lindholm > >> > _______________________________________________ > >> > Sprinklerforum mailing list > >> > [email protected] > >> > > >> > > >> > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > >> > > >> _______________________________________________ > >> Sprinklerforum mailing list > >> [email protected] > > >> > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > > > > -- > Best regards, > Charles mailto:[email protected] > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
