Hi Charles. I am unable to answer this. I have always thought flushing was some kind of extreme measure rarely undertaken even for steel. On Aug 26, 2016 8:21 PM, "Charles Thurston" <[email protected]> wrote:
> Hello Brad, > > Then add the glue dry time after the flush for putting on a new cap to the > job before you can put it back in service... Is that really cheaper then a > groove cap? > > Friday, August 26, 2016, 9:09:16 PM, you wrote: > > > Friday all day Mark. > > 'in order to form a more perfect 13' I conclude that a hack saw will > more readily remove the fittings at the ends of all CPVC cross mains than > whatever it takes to do the same with steel, so, Bruce wins in the catagory > of "most economical" with his extra foot of pipe and glue cap entry :) > thanks Bruce, and everone else again. > > On Aug 26, 2016 11:03 AM, <[email protected]> wrote: > > > > > > > > > We stopped using them 7 or 8 years ago based on the cost. I’m working > from memory on the cost each. But it is Friday, right? > > > > > > > > Mark at Aero > > > > 602 820-7894 > > > > > > > > > > > > From: Sprinklerforum [mailto:[email protected]. > org] On Behalf Of Timothy Goins > > Sent: Friday, August 26, 2016 6:22 AM > > To: [email protected] > > Subject: Re: Provision for flushing CPVC > > > > > > > > > > I could sell you about three for that price. Check your pricing with > your vendor. > > > > Sent from my iPhone > > > > > > > On Aug 25, 2016, at 9:36 PM, <[email protected]> < > [email protected]> wrote: > > > > > > > > > > If you don't mind the cost the grooved adaptor does work, but they are > pricey. Around $60 with a grooved coupling and cap! ;-( > > > > Mark at Aero > > > > > > 602 820-7894 > > > > > > > > > > > > Sent from my iPhone > > > > > > > On Aug 25, 2016, at 6:57 PM, Brad Casterline <[email protected]> > wrote: > > > > > > > > If that comes in 2" also Timothy I gust might have this now thnx. > > > > > > On Aug 25, 2016 8:52 PM, "Timothy W Goins" <[email protected]> wrote: > > > > > > > > 1½” grooved adapter with a grooved cap/plug works great. > > > > > > > > > > > > From: Sprinklerforum [mailto:[email protected]. > org] On Behalf Of Bruce Verhei > > Sent: Thursday, August 25, 2016 7:12 PM > > To: [email protected] > > Subject: Re: Provision for flushing CPVC > > > > > > > > > > A extra foot of pipe, with glued on cap? > > > > > > > On Aug 25, 2016, at 16:50, Brad Casterline <[email protected]> > wrote: > > > > > > > > That might be a bingo right there Timothy, thanks! > > > > > > On Aug 25, 2016 6:47 PM, "Timothy Goins" <[email protected]> wrote: > > > > > > > > You'd be surprised how much trash and debris gets into a system when the > utility company or a plumber is careless. > > > > Sent from my iPhone > > > > > > > On Aug 25, 2016, at 6:12 PM, rongreenman . <[email protected]> > wrote: > > > > > > > > > > Why would you need to flush CPVC? > > > > > > > > > > > > On Thu, Aug 25, 2016 at 8:08 AM, Brad Casterline < > [email protected]> wrote: > > > > > > > > Thanks Charles. > > > > > > > > I'm just the stocklister at this point Scott :) > > > > > > > > Brad > > > > > > > > > > > > > > > From: Sprinklerforum [mailto:[email protected]. > org] On Behalf Of Scott Futrell > > Sent: Thursday, August 25, 2016 9:40 AM > > To: [email protected] > > Subject: RE: Provision for flushing CPVC > > > > > > > > > > > > Replace them with steel… > > > > > > > > > > Scott > > > > > > > > Office: (763) 425-1001 x 2 > > > > Cell: (612) 759-5556 > > > > > > > > > > > > From: Sprinklerforum [mailto:[email protected]. > org] On Behalf Of Brad Casterline > > Sent: Thursday, August 25, 2016 9:26 AM > > To: [email protected] > > Subject: Provision for flushing CPVC > > > > > > > > Hello, > > > > > > > > Can someone tell me the most economical way for providing for flushing > 1.5" and 2" CPVC mains please? > > > > > > > > thanks, > > > > > > > > Brad Casterline, NICET IV > > > > Fire Protection Division > > > > > > > > FSC, Inc. > > > > P: 913-722-3473 > > > > [email protected] > > > > www.fsc-inc.com > > > > > > > > Engineering Solutions for the Built Environment > > > > > > > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/ > sprinklerforum-firesprinkler.org > > > > > > > > > > > > > > > > > > > -- > Best regards, > Charles mailto:[email protected] > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org >
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
