> On Aug 27, 2016, at 12:20, Brad Casterline <[email protected]> wrote: > > That was an O-ring failure Bill, integral to the successful operation, and if > we were talking about sprinkler O-rings I would agree. > I have never heard of a nipple and cap being the cause of a catastrophic > failure. > I'm not trying to be a smart a$$ here-- I have decided to think about > everything I do like it was my first day on the job. > Thanks, > > Brad > >> On Aug 26, 2016 8:46 PM, "Bill Cunningham" <[email protected]> wrote: >> The low bidder built the space shuttle Challenger. These things should be >> included with the bid or design build pricing. >> >> Sent from my iPhone >> >>> On Aug 26, 2016, at 6:34 PM, Brad Casterline <[email protected]> wrote: >>> >>> Hi Charles. >>> I am unable to answer this. >>> I have always thought flushing was some kind of extreme measure rarely >>> undertaken even for steel. >>> >>>> On Aug 26, 2016 8:21 PM, "Charles Thurston" <[email protected]> wrote: >>>> Hello Brad, >>>> >>>> Then add the glue dry time after the flush for putting on a new cap to the >>>> job before you can put it back in service... Is that really cheaper then a >>>> groove cap? >>>> >>>> Friday, August 26, 2016, 9:09:16 PM, you wrote: >>>> >>>> > Friday all day Mark. >>>> > 'in order to form a more perfect 13' I conclude that a hack saw will >>>> > more readily remove the fittings at the ends of all CPVC cross mains >>>> > than whatever it takes to do the same with steel, so, Bruce wins in the >>>> > catagory of "most economical" with his extra foot of pipe and glue cap >>>> > entry :) thanks Bruce, and everone else again. >>>> > On Aug 26, 2016 11:03 AM, <[email protected]> wrote: >>>> >>>> > >>>> > >>>> > >>>> > We stopped using them 7 or 8 years ago based on the cost. I’m working >>>> > from memory on the cost each. But it is Friday, right? >>>> > >>>> > >>>> > >>>> > Mark at Aero >>>> > >>>> > 602 820-7894 >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > From: Sprinklerforum >>>> > [mailto:[email protected]] On Behalf Of >>>> > Timothy Goins >>>> > Sent: Friday, August 26, 2016 6:22 AM >>>> > To: [email protected] >>>> > Subject: Re: Provision for flushing CPVC >>>> > >>>> > >>>> > >>>> > >>>> > I could sell you about three for that price. Check your pricing with >>>> > your vendor. >>>> > >>>> > Sent from my iPhone >>>> > >>>> > >>>> >>>> > On Aug 25, 2016, at 9:36 PM, <[email protected]> >>>> > <[email protected]> wrote: >>>> > >>>> > >>>> > >>>> > >>>> > If you don't mind the cost the grooved adaptor does work, but they are >>>> > pricey. Around $60 with a grooved coupling and cap! ;-( >>>> > >>>> > Mark at Aero >>>> > >>>> > >>>> > 602 820-7894 >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Sent from my iPhone >>>> > >>>> > >>>> >>>> > On Aug 25, 2016, at 6:57 PM, Brad Casterline <[email protected]> >>>> > wrote: >>>> > >>>> > >>>> > >>>> > If that comes in 2" also Timothy I gust might have this now thnx. >>>> > >>>> > >>>> > On Aug 25, 2016 8:52 PM, "Timothy W Goins" <[email protected]> wrote: >>>> > >>>> > >>>> > >>>> > 1½” grooved adapter with a grooved cap/plug works great. >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > From: Sprinklerforum >>>> > [mailto:[email protected]] On Behalf Of >>>> > Bruce Verhei >>>> > Sent: Thursday, August 25, 2016 7:12 PM >>>> > To: [email protected] >>>> > Subject: Re: Provision for flushing CPVC >>>> > >>>> > >>>> > >>>> > >>>> > A extra foot of pipe, with glued on cap? >>>> > >>>> > >>>> >>>> > On Aug 25, 2016, at 16:50, Brad Casterline <[email protected]> >>>> > wrote: >>>> > >>>> > >>>> > >>>> > That might be a bingo right there Timothy, thanks! >>>> > >>>> > >>>> > On Aug 25, 2016 6:47 PM, "Timothy Goins" <[email protected]> wrote: >>>> > >>>> > >>>> > >>>> > You'd be surprised how much trash and debris gets into a system when the >>>> > utility company or a plumber is careless. >>>> > >>>> > Sent from my iPhone >>>> > >>>> > >>>> >>>> > On Aug 25, 2016, at 6:12 PM, rongreenman . <[email protected]> >>>> > wrote: >>>> > >>>> > >>>> > >>>> > >>>> > Why would you need to flush CPVC? >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > On Thu, Aug 25, 2016 at 8:08 AM, Brad Casterline >>>> > <[email protected]> wrote: >>>> > >>>> > >>>> > >>>> > Thanks Charles. >>>> > >>>> > >>>> > >>>> > I'm just the stocklister at this point Scott :) >>>> > >>>> > >>>> > >>>> > Brad >>>> > >>>> > >>>> > >>>> > >>>> > >>>> >>>> > >>>> > From: Sprinklerforum >>>> > [mailto:[email protected]] On Behalf Of >>>> > Scott Futrell >>>> > Sent: Thursday, August 25, 2016 9:40 AM >>>> > To: [email protected] >>>> > Subject: RE: Provision for flushing CPVC >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > Replace them with steel… >>>> > >>>> > >>>> > >>>> > >>>> > Scott >>>> > >>>> > >>>> > >>>> > Office: (763) 425-1001 x 2 >>>> > >>>> > Cell: (612) 759-5556 >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > From: Sprinklerforum >>>> > [mailto:[email protected]] On Behalf Of >>>> > Brad Casterline >>>> > Sent: Thursday, August 25, 2016 9:26 AM >>>> > To: [email protected] >>>> > Subject: Provision for flushing CPVC >>>> > >>>> > >>>> > >>>> > Hello, >>>> > >>>> > >>>> > >>>> > Can someone tell me the most economical way for providing for flushing >>>> > 1.5" and 2" CPVC mains please? >>>> > >>>> > >>>> > >>>> > thanks, >>>> > >>>> > >>>> > >>>> > Brad Casterline, NICET IV >>>> > >>>> > Fire Protection Division >>>> > >>>> > >>>> > >>>> > FSC, Inc. >>>> > >>>> > P: 913-722-3473 >>>> > >>>> > [email protected] >>>> > >>>> > www.fsc-inc.com >>>> > >>>> > >>>> > >>>> > Engineering Solutions for the Built Environment >>>> > >>>> > >>>> > >>>> >>>> > _______________________________________________ >>>> > Sprinklerforum mailing list >>>> > [email protected] >>>> > >>>> > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org >>>> > >>>> >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Charles mailto:[email protected] >>>> >>>> _______________________________________________ >>>> Sprinklerforum mailing list >>>> [email protected] >>>> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org >>> _______________________________________________ >>> Sprinklerforum mailing list >>> [email protected] >>> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org >> >> _______________________________________________ >> Sprinklerforum mailing list >> [email protected] >> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
