Yes sir Good luck let me know if you come up with anything Mark Sent from my Verizon 4G LTE Droid On Jul 21, 2017 3:40 PM, "Micah Davis, SET" <[email protected]> wrote: I had a feeling it would be a pain. Thank you for the input, Mark.
-----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Mark Phillips Sent: Friday, July 21, 2017 2:34 PM To: [email protected] Subject: Re: Bending Pipe Plot pipe to full size Lay print on floor Hydraulic pipe bender to match print PITA Sent from my Verizon 4G LTE Droid On Jul 21, 2017 3:31 PM, "Micah Davis, SET" <[email protected]> wrote: Anyone out there ever taken advantage of the allowance in NFPA 13 to bend system piping? If so, how did you go about specifying it for fabrication? Also, how did it turn out? Was it worth the effort? I have a project that has a curved roof that looks almost like a wave. Bent pipe would really help if I can figure out a way to get it fabricated. Micah Davis www.dynamicfiredesigns.com<http://www.dynamicfiredesigns.com> _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
