I dumb it down No title block No details Etc Sent from my Verizon 4G LTE Droid On Jul 24, 2017 5:58 PM, Bob <[email protected]> wrote: Travis/ Matt, Do you strip out your title blocks or anything. The disclaimer is no problem, I have one that I use already. I haven’t been paid yet, but expect to be.
Thank you, Bob Knight, CET III 208-318-3057 From: Sprinklerforum [mailto:[email protected]] On Behalf Of Matt Grise Sent: Monday, July 24, 2017 3:54 PM To: [email protected]; [email protected] Subject: RE: Bid Drawings Any time I get or give out electronic drawings there is a release of liability waiver involved. Essentially – these drawings are provided for your convenience, may or may not be accurate, up to date, filled with viruses, going to crash your system. If you use them it is at your own risk. Matt From: Sprinklerforum [mailto:[email protected]] On Behalf Of Bob Sent: Monday, July 24, 2017 4:51 PM To: [email protected]<mailto:[email protected]> Subject: Bid Drawings I provided a drawing for an architect that was used for bid purposes. The intent was to have the fire sprinkler contractors all bid “apples-to-apples”. That sort of happened and now the project has been awarded. The FSC has contacted me asking for the drawings of the fire sprinkler layout. I was wondering if any other designers have done this and how you might have treated this situation. Do you provided the drawings upon request? The contractor wants them for free, of course. Is there a liability that I need to be concerned with? The drawings show pipe routing and sizes, but not hydraulic information. Basically, there about 30% drawings with notes. Any other thoughts and comments will be appreciated. Thank you, Bob Knight, CET III 208-318-3057 [FBK-LOGO-SMALL]
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
