No, This is from other linux hosts with SSH2 installed (not SSH1).
Another bit of weirdness is that it answers to ssh1 despite the fact
that SSH2 is installed, but not consistently. For example, I can ssh in
from my shell account (with ssh1) but not from a xDSL connected NT box
with Secure CRT regarless of selecting SSH1 or 2. Connections are allowed
form the firewall.
When I telnet to port 22 I get the following:
# telnet localhost 22
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
SSH-1.99-2.0.13 (non-commercial)
On Tue, 4 Apr 2000, Jeff Foster wrote:
>
> Are you using a Win98 client or a Win95 client with DUN 1.3? These clients
> have some TCP stack issues.
>
> Jeff Foster
> [EMAIL PROTECTED]
>
> -----Original Message-----
> From: Donald Harper [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 04, 2000 2:15 AM
> To: [EMAIL PROTECTED]
> Subject: Re: X11 forwarding through TTSSH.
>
>
> Hello All,
>
> I am have the strangest problem with SSH2 (ssh-2.0.13) on RH 6.1 (2.2.14).
> When I try to ssh in to the host in question, I get the following error:
>
> Disconnected; protocol error (Protocol error: packet too long:
> -2074875328.).
>
> I can ssh out just fine...
>
> It once worked well... What I have changed since it last worked, is the
> Network configuration. I also recompiled the kernel, but it did work after
> that.
>
> The strangest thing is that I have a host that is identicle in every way
> (except the name and IP, of course).
>
> Write back if you need more info.
>
> If anyone can help, I would greatly appreciate it.
>
> Donald Harper
>
