Dear Toomas and all, Some of the setting are already o.k. I believe.
1/. root@wiked:~# netadm list netadm: DefaultFixed NCP is enabled; automatic network management is not available. 'netadm list' is only supported when automatic network management is active. root@wiked:~# so that's already o.k. 2/. root@wiked:~# ipadm show-if IFNAME CLASS STATE ACTIVE OVER lo0 loopback ok yes -- net0 ip ok yes -- root@wiked:~# so that is o.k. to start with I think. I want SunRay to pick up net1 as the private interconnect, so assuming things are like "in the old days", it is probably correct that it does not show yet. ipadm show-addr display the fixed addresses I have allocated to net0 so that's o.k. too I think. root@wiked:~# svccfg -s svc:/system/identity:node listprop config/nodename config/nodename astring wiked root@wiked:~# so I don't need to set that. 3/. Toomas said... tso...@mac.com said: > set up your /etc/resolv.conf and /etc/nsswitch.conf with proper > content and import the config: > # nscfg import -f svc:/system/name-service/switch:default # nscfg > import -f svc:/network/dns/client:default I have checked and both files are already o.k. and it sayd they have been generated from SMF data so I don't think I need to change things there either. 4/. tso...@mac.com said: > also fix your hosts file So, here the "default" /etc/hosts has the computer's name ("wiked") on the 127.0.0.1/localhost line. So, I will edit that as I did yesterday to have the machine's name on a new line against it's IP address from net0. However, I think that then just takes me to exactly the state I was at yesterday and then after that, if I use utsetup I expect it to fail again as I will have changed nothing beyond what I had yesterday. Well, except I now have some SunRay firmware in place and I was trying without that yesterday. I will read what the others said before I try anything. Dave Price _______________________________________________ SunRay-Users mailing list SunRay-Users@filibeto.org http://www.filibeto.org/mailman/listinfo/sunray-users