Yes, you're right, in my setup this was the solution, disable Automatic outbound NAT rule generation, I removed the gateway in my dmz and is working as expected. Thank'you all for your help, what a great software is pfsense. Best regards
2008/8/20 Chris Buechler <[EMAIL PROTECTED]>: > On Wed, Aug 20, 2008 at 5:55 PM, Aliet Santiesteban Sifontes > <[EMAIL PROTECTED]> wrote: >> People, here I attach you an image with my current settings and the >> migration, is just replace one firewall with pfsense, without changing >> anything else. Notice that my wan is a private /30 network only for >> connect with the isp, the public addresses are on the dmz net. >> Is this posible as it is wusing pfsense?? >> > > Yes, as you've been told 3 times now and this makes 4, just setup AON > properly and it will work fine. Not sure what'll happen to traffic > from your private network, if your ISP NATs your private /30 then you > should be fine NATing that subnet to your WAN IP and not NATing your > DMZ segment. > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
