At 12:16 AM 1/6/00 +1000, ben wrote:
>You'll have to disable the existing COM2, otherwise they will fight
>for the commands and everything will get horribly confused,
>expecially since they're different UARTs and everything.
How? Didn't see anything about coms or irqs in the bios, so where?
>Hehe my modem had the 6 switches, but the diagram was upside down.
>(Well it wasn't really since there was a legend but the prints were
>the opposite of what you'd expect.)
You mean the printout didn't correspond locationally with the
switches? This print is right beside the switches on the slot
cover. Seems unlikely it would be opposite orientation.
>I know opera is still easy to find for w31, and theres still plenty
>in simtelnet.
Opera dies in 30 days if you don't pay for it and money is much too scarce
around here. I did search long and hard but could not find a workaround to
bypass this stipulation. Nuff said, this is not considered appropriate
discussion as I understand it.
I finally settled on IExplore for 16bit and it will do well enough.
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
