Thank you so much for offering to help, Gordon! As Alan mentioned, for this application I don't really need to worry about obtaining accuracy to four decimal places.
If you can't find your manual, please let me know what would be the easiest way to learn how to calibrate it. If it would take a long time to type out instructions, I would be happy to phone you and take notes while you explain it. Thanks again! Maud >no problem calibrating the machine > >providing you have calibrated weights and time and patience > >also the machine is almost defiantly a beam balance with knife and planes so >it may not work to well as these are probably worn > >you may only get it accurate to, 2 dec. places > >some were i have a manual if i can dig through all my stuff. > >if not i can give you basic instructions but it is not easy i worked >as a service enginer on these type of machines and a calibration can >take from 15 minutes to a couple of hours depending on how bad it is > Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Biofuels list archives: http://archive.nnytech.net/index.php?list=biofuel Please do NOT send Unsubscribe messages to the list address. To unsubscribe, send an email to: [EMAIL PROTECTED] Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/biofuel/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
