This is the reason why I am extremely reluckton to update firmware if phone is working wonderfully. I am still using V10 on my N79. I never see any difference with my friends who are using V30 in their phone. Furthermore, upgraded to latest will always have some trouble with Talks. Especially the Symbol reading and so on. So, the best is wait for Talks release with the firmware already out. Then we might not face such symbol reading problems.
----- Original Message ----- From: Bernard Hemmings To: talks Sent: Saturday, November 06, 2010 1:44 PM Subject: [Talks] talks not speaking symbol list following firmware update one72. I think Nuance needs to address this issue. I've seen other people mention this problem. Since updating to the latest firmware for my e72 talks will no longer speak the symbol list it just says c every time you press the arrow keys and when you go in to the different pages of symbols you hear 1/2 c or 1/1 c. I was writing an email message when I discovered this problem and I have seen other mentions on the list with other phone models. Sure you can use some symbols on the keyboard but access for most symbols does not seem possible. Bernard Hemmings email: [email protected] Skype: Bernard Hemmings Ftp server email: [email protected] ftp server address: livingaudio.bhemmings.net Home: 61-02-95841280 Mobile: 61-0412177799 _______________________________________________ Talks mailing list [email protected] http://lists.talksusers.com/mailman/listinfo/talks Hosting of this list provided courtesy of: eHosting Limited: http://www.ehosting.com/ and Talknav Inc. http://www.talknav.net/ _______________________________________________ Talks mailing list [email protected] http://lists.talksusers.com/mailman/listinfo/talks Hosting of this list provided courtesy of: eHosting Limited: http://www.ehosting.com/ and Talknav Inc. http://www.talknav.net/
