Rod Whitworth wrote:
On Tue, 20 Apr 2010 17:58:17 +0100, Luis Henriques wrote:
On Tue, Apr 20, 2010 at 12:14:51PM -0400, Adam M. Dutko wrote:
Lines identifying the card:
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 2 int 17 (irq
10)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address XX:XX:XX:XX:XX:XX
I have the version the other folks had that had issues with your patch. I
can still attempt to use the patch if you'd like...
Well, I guess there's no point trying it since this version has been tested
already. I can take a look again at the linux and netbsd code to try to figure
out what is missing to have your card working. But it will be trial & error:
I send you a patch and you test it :-)
I'll try to get some time today or tomorrow to dive into the driver again.
--
Luis
On Tue, Apr 20, 2010 at 11:31 AM, Luis Henriques <luis.hen...@gmail.com>wrote:
On Tue, Apr 20, 2010 at 4:06 PM, Adam M. Dutko <dutko.a...@gmail.com>
wrote:
I have a card to test with and am trying to solve the problem on my eeepc
laptop. Luis, are you still around and interested in working on this?
Yep, still around. But not sure how I can help without the actual HW.
Sometime ago I submited a patch that is working for my card:
ath0 at pci4 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 2 int 19 (irq
11)
ath0: AR5424 10.2 phy 6.1 rf 6.0, WORAW, address XX:XX:XX:XX:XX:XX
I'm using a CVS head kernel with this patch on my laptop, but some
other guys tried
the same patch with different revs of the card without success:
http://marc.info/?l=openbsd-tech&m=126437914024661&w=2
Try the patch to see what happens. Ah, and send the dmesg (at least the
lines identifing the card.
--
Luis
Hi Luis,
I have one too. It shows:
ath0: AR5424 14.2 phy 7.0 rf 0.0, EU1W, address XX:XX:XX:XX:XX:XX
and it is in a Samsung NC20 like the one Todd Fries has
(http://todd.fries.net/pub/chrome.dmesg) except for the EU1W (Euro?) so
there are at least a few of us using OpenBSD with nogo on the built in
card.
I'd like to try a patch too but it will take me a bit longer to get my
build done as I'm short a build machine ATM. If I can find a supported
mini-pci that works you might just get the ath if you want it. Let me
know.
If you are mailing the patch please send to yendor<dot>loki3 at the
same domain as you use. Don't ever try the glisten address!
Thanks,
Rod
I have been bumbling around with the same card as well.
So I too have interest in any findings.
Also, thanks Luis, while your patch does not make my card run.
I figure whatever you needed to do to get your card work will
be somewhat the same as to what I need to do, So I am kind using your
patch as a guide as to what bits I need to look at first. Exactly what I
needed to get started. awesome.
