Hi Bill Sounds like you need to print on a larger piece of paper. 1m x 0.6m is quite modest. I presume you are not printing your pdf file out at the full size that Therion generated it at.
I have not had any legend size issues with a 30km cave, although I must admit that I do with very small caves, where the legend ends up much bigger than the cave itself! If you want to fit your cave to paper of a particular size, then change the scale. I rarely use anything less than 'scale 1 1000' for a cave longer than 1km. To be precise about fitting the cave to a particular paper size, then 'export atlas' will give a better result than 'export map', although of course atlas do give quite a different end product, and take a bit more care and attention to set up well. Bruce From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Bill Gee via Therion Sent: Friday, 10 November 2017 2:45 AM To: Therion Mail List <therion@speleo.sk> Cc: Bill Gee <b...@campercaver.net> Subject: [Therion] Increase size of legend Hello everyone - I need to make the legend on a map larger. The cave has grown to nearly 3km of passage, and even when printed on 60cm x 100cm paper the legend is too smal to read. Even a magnifying glass does not help! . snipped. Thanks! -- Bill Gee
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion