Hi Nevell, FYI my one delivers almost +5dBm on 50 Ohm.....Ref Voltage +4,86 Volt.
Rgds Ernie. -----Original Message----- From: Scott Newell <newell+timen...@n5tnl.com> To: time-nuts <time-nuts@febo.com> Sent: Thu, Feb 9, 2012 5:16 am Subject: [time-nuts] Morion MV89 output level? Got my replacement FE-5680 and a MV89 in from Nichegeek. I figured 'd better power up and check the MV89 before I let 'em know verything was ok. The MV89 is warming up nicely, the current is own to 290 mA (and still dropping), but the output seems low; about 0 mV RMS as measured on a scope with a 10Meg 10x probe. (Datasheet pec is +7 +/- 2 dBm.) The output is too weak to reliably trigger my 345A counter. The reference voltage measures 4.90 VDC. If anyone can make a quick measurement on their MV89, I'd appreciate it. hanks! ewell N5TNL ______________________________________________ ime-nuts mailing list -- time-nuts@febo.com o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts nd follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.