why are you using tosthreads?
On Thu, Feb 13, 2014 at 11:12 AM, Stephen Schaub <ssch...@gmail.com> wrote: > I have not had success using TOSThreads to write to the Uart interface. > So, I devised the following test. > > Using tinyos-2.1.2 distribution, I performed the following test with two > telos motes: > > cd apps/tosthreads/apps/RadioStress > make install,1 telosb threads bsl,/dev/ttyUSB1 > > The mote's led's indicate that it is transmitting. > > cd apps/tosthreads/apps/BaseStation > make install,2 telosb threads bsl,/dev/ttyUSB0 > > The mote's led's indicate that it is receiving. > > export MOTECOM=serial@/dev/ttyUSB0:telosb > java net.tinyos.tools.Listen > > Output to the console is a stream of bad packet messages: > > serial@/dev/ttyUSB0:115200: bad packet > serial@/dev/ttyUSB0:115200: bad packet > ... > > Now, I replace the threaded version of BaseStation with the event-based > one: > > cd apps/BaseStation > make install,2 telosb bsl,/dev/ttyUSB0 > > Output from java net.tinyos.tools.Listen now appears correct. > > Can anyone confirm this behavior? Is this a known problem with the > BaseStation threads demo? > > Stephen > _______________________________________________ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
