Board is an a3 es 2.3. Allready tried another cable which lead to the same result as before.
Do you have any recommendations or shall I wait until newer kernels are used in oneiric LEB's? I would build it myself but since I got only 30 gig on my hd this is impossible. One newbish question - is it possible just to load kernel sources and build these alone? It's 19 years since I built my last kernel... linux was somewhat small back these days -- You received this bug notification because you are a member of TI OMAP Developers, which is subscribed to linaro-landing-team-ti. https://bugs.launchpad.net/bugs/919395 Title: Panda: only low resolution on 1080p plasma Status in Linaro Texas Instruments Landing Team: Confirmed Status in Linaro Ubuntu Evaluation Builds: Confirmed Bug description: Installed the linarotv image 20120114-2 and hwpack_linaro-lt-panda-x11-base_20120106-1 on a Pandaboard ES with linaro-media-create. After boot installed ubuntu-omap4-extras-multimedia. Then did a dist-upgrade on Jan 21. 20:45CET HDMI connected to a Yamaha RX-V1800 audio-video-receiver and from there to a 1080p plasma TV. The resulting screen resolution was only 720×576@50 and xbmc does not offer any further resolutions or refresh rates. The EDID sent by the Yamaha AVR includes many resolutions up to 1080p (verified with SwitchResX on a MacBook). Attached boot log with options omapdss.debug=1 drm.debug=7 and EDID To manage notifications about this bug go to: https://bugs.launchpad.net/linaro-landing-team-ti/+bug/919395/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~tiomap-dev Post to : [email protected] Unsubscribe : https://launchpad.net/~tiomap-dev More help : https://help.launchpad.net/ListHelp
