JohnSwenson;570072 Wrote: > The Touch uses a "union file system". The firmware gets loaded into the > "base" file system, any changes (settings, edited files etc) go into an > "overlay". The union of these two is what everything else sees. The > factory reset deletes the overlay. It does not reload the base > filesystem. It sounds like you have something corrupted in the base, so > just a factory reset doesn't cut it. > > You probably need to reload the firmware, not just factory reset. You > should be able to put the fab4.bin file on SD or USB stick, boot and > select update from media. That takes the touchscreen to get to the > update menu. I'm sure it can be done directly from the SD or USB > without any interaction at all, but I don't remember how thats done. > I'd have to spend a little time pouring over the code to work it out. > > John S. Thanks John - very helpful as always... where would I locate the fab4.bin file? I think I can possibly persuade the touchscreen long enough to work... Please don't spend much time on this - I know your time is valuable. Cheers Phil
-- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=81223 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch