Triode wrote: > I need to try this again - according to the imx35 reference manual there > is a divider which should be able to be programmed to change the clock > rate, but when I tried it didn't appear to work. I don't have access to > test gear to look at the lock rates coming out of the imx35 soc chip so > would be interested in trying some changes if other people can test the > impact on the clock outputs. > > I would be interested in your reading of 46.4.2 of the processor > reference manual - (I think available from the freescale site) - do you > think changing the div2 stage would result in the right clocks?
I certainly have access to the I2S lines and can report the clock rates that appear there given a test kernal. I found the imx35 doc you mentioned. Can you point me toward a circuit or block diagram of how this device is connected inside the Touch? I no longer have the device open. ------------------------------------------------------------------------ JIJ3's Profile: http://forums.slimdevices.com/member.php?userid=36534 View this thread: http://forums.slimdevices.com/showthread.php?t=93310 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
