diego wrote: > Thanks for the answer! > > It needs a proprietary driver for Windows. I guess, this is not the > standard uac 2, right? Here is the drivers needed: > http://www.audio-gd.com/Pro/dac/TE8802/TE8802EN.htm > > 1) However, I connected it already to Windows with the proprietary > driver, and the windows firmware installed. I tested it successfully on > 44.1k, 48k, 88.2k and 96k. However, my DAC does not support higher > frequencies (I am upgrading it, but don't have the parts yet), so I did > not test 176.4 and 192k. > > 2) Does it make sense to test that, if it needs a proprietary driver > under windows? As I wrote, when I connect it with the windows firmware, > and reboot, the SBT remains on the "DAC not connected" screen forever. > Should I try to SSH into it in this state?
I guess the question is whether they claim it works with uac2 (which windows does not include but osx does and linux does). If teac claims it works then I would hope this may. If you do this - please ssh in when it is in the "DAC not connected" state and then let me have the dmesg output. It may be something simple which is preventing it being detected. However its difficult to diagnose from afar. ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=93310 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
