batka wrote: > That somehow suggests to me that IP settings are still not fully OK with > your setup. > For maximum safety I would suggest to give IP settings to everything > manually, e.g. not using DCHP. > The settings, including to set the Default Gateway and DHCP settings, > are also must be done in the router as well. And everything should be in > the same subnet. > > So to conclude things, the same example of mine again with extended > infos, this is a manual settings example: > > 1. At the router: > - Make sure it has IP 192.168.0.1 inside, and Mask is 255.255.255.0 > - Disable the DHCP server in the router! (Only in case of manual IP > settings) > - Enter 192.168.0.1 for the internal Default Gateway in router. > > 2. Touch: > - Select manual settings > - IP: 192.168.0.40 > - Mask: 255.255.255.0 > - Default Gateway: 192.168.0.1 > - DNS: 192.168.0.1 (although this should work also with the external DNS > provided by ISP). > > 3. The server running LMS: > - Select manual settings > - IP: 192.168.0.80 > - Mask: 255.255.255.0 > - Default Gateway: 192.168.0.1 > - DNS: 192.168.0.1 (although this should work also with the external DNS > provided by ISP). > > What is important they all should be in same subnet, and the DHCP > setting should match. > > In case some using not manual, but DHCP, then in the router the DHCP > settings must be done correctly, i.e. a range is suggested to be > specified, with start IP and end IP , so that client chooses them from a > given subnet. There can be Ip reservation settings also to clients in > that case. > > Then firewall should be turned off until testing. > > Finally a comment. While SB Classic automatically wanted to connect to > LMS, it seems the Touch is not necesseraly! Because the Touch can also > work in standalone mode, without LMS. Hence, for the Touch, you NEED to > go into My Music and try to play music from LMS. Otherwise maybe Touch > is not doing anything, and is not detected if meanwhile the settings are > OK. > > On the other hand, it's also true, once you tried to connect, then Touch > keeps to connecting attempts. Then , after let's say restoring the > firewall on LMS machine, then Touch will connect in some seconds.I told > this to make sure that you actually try to connect, when you make the > test cases. :) Thanks for the settings example very helpful!I will set manually all the adresses and i will try again!!
------------------------------------------------------------------------ wynn's Profile: http://forums.slimdevices.com/member.php?userid=57144 View this thread: http://forums.slimdevices.com/showthread.php?t=96295 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch
