The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
bit 26, instead it should be bit 28. This caused in incorrect
interpretation of the i2c_clk which is the same as the SEC clk on
MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
in PORDEVSR2.
Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
---
include/asm-ppc/immap_85xx.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 50c9dde..6c81c39 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1579,7 +1579,7 @@ typedef struct ccsr_gur {
#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
uint pordevsr2; /* 0xe0014 - POR I/O device status regsiter 2 */
-#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000020
+#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
char res1[8];
uint gpporcr; /* 0xe0020 - General-purpose POR configuration
register */
char res2[12];
--
1.5.5.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
