+Tom On 19 May 2014 07:39, Jagan Teki <jagannadh.t...@gmail.com> wrote: > > On Mon, May 19, 2014 at 10:06 AM, KJ H. Kiran <kj.h.ki...@us.abb.com> wrote: > > > > Hi , > > > > > > I am trying to make a eval board from TI to boot it with the new FIT image > > format. > > > > > > I have followed the below procedure but iam getting the "No valid FDT found > > - please append one to U-Boot binary, use u-boot-dtb.bin or define > > CONFIG_OF_EMBED." error message. Cannot find out what is the exact problem. > > > > This shouldn't be an issue with FIT - issue with booting u-boot fdt bin > > Just for FIT work usage - try to boot with u-boot.bin (fdt less u-boot bin) > So-that you can end up with normal u-boot booting. > > On u-boot prompt and load u-boot-fdt.bin with TEXTBASE then load > u-boot> fatload mmc 0 ${TEXTBASE} u-boot-fdt.bin > u-boot> go ${TEXTBASE} > > ------ fdt u-boot boot prompt> > u-boot> fatload mmc 0 ${LOADADDR} kernel_fdt.itb > u-boot> bootm ${LOADADDR} > ..... > > Please send output log for this.
I hit this problem myself and posted this patch and the following series: http://patchwork.ozlabs.org/patch/339609/ I heard from one person that it didn't work for them, but I haven't got back to it yet. Still, it might help you. There was a problem with the hash pushing out the end of the image. > > > > > > U-Boot Source: > > > > The latest source code from denx. > > > > patman: Suppress duplicate signoffs only for real patches on 05/17/2014 > > > > > > Procedure: > > > > Followed the exact same process mentioned in > > > > http://www.denx.de/wiki/pub/U-Boot/MiniSummitELCE2013/U-Boot_verified_RSA_boot_flow_on_arm_target.pdf > > > > > > I created a device tree and was able to generate a u-boot-dtb.bin file. > > > > > > SD CARD: > > > > 1) copied the MLO in /boot > > > > 2) copied the u-boot-dtb.bin in /boot > > > > 3) coped the kernel_fdt.itb file > > > > 4) uEnv has > > > > console=ttyO0,115200n8 > > fitfdt=/boot/kernel_fdt.itb > > setenv loadaddr 0x82000000; run mmcargs; ext2load mmc ${mmcdev}:2 > > ${loadaddr} ${fitfdt}; > > > > > > I loaded the u-boot-dtb.bin file but it still complains ! Not much help > > form the forums/internet > > > > > > Please let me know if i missed anything here. > > > thanks! > -- > Jagan. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot