Hi Simon,
I have added the next patch in the series i.e., (....../339610/) But the
result is still the same. This particular patch just created a device tree
In the arch/arm/dts folder For the beaglebone. I have already tried
creating for am335x-evmsk and was able to build the u-boot-dtb.bin.
I have noticed that MLO is configured to read only the u-boot.img not any
other binaries (eg U-boot.bin or u-boot-dtb.bin).
It gives me the following error..
spl_load_image_fat: error reading image u-boot.img, err - -1 Which part of
the configuration I should change so that MLO tries to read the
u-boot-dtb.bin as the third stage bootloader??
I tried loading MLO->u-boot.img first, but this time it reads the
u-boot.img but gives the following error..
reading u-boot.img
reading u-boot.img
No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin
or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb> ### ERROR ###
Please RESET the board ###
I tried applying the next patch in the series to add that extra padding to
the image size (ie., .......org/patch/339611) But could not successfully
apply the patch..
harsha@harshakiran_kasha:/abb/Experiments/u-boot$ sudo patch -p1 -R <
patch3.patch patching file tools/fit_image.c Hunk #1 FAILED at 35.
Hunk #2 FAILED at 60.
Hunk #3 succeeded at 38 (offset -137 lines).
Hunk #4 FAILED at 210.
Hunk #5 succeeded at 115 (offset -123 lines).
3 out of 5 hunks FAILED -- saving rejects to file tools/fit_image.c.rej
patching file tools/image-host.c
and then the compilation gave the following errors..
harsha@harshakiran_kasha:/abb/Experiments/u-boot$ sudo make ARCH=arm
CROSS_COMPILE=/abb/compilers/gcc-linaro-arm-linux-gnueabihf-4.7-2013.04-20130415_linux/bin/arm-linux-gnueabihf-
-j8 DEV_TREE_BIN=./am335x-boneblack.dtb
CHK include/config/uboot.release
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
CHK include/generated/version_autogenerated.h
HOSTCC tools/dumpimage.o
HOSTCC tools/fit_image.o
HOSTCC tools/image-host.o
HOSTCC tools/mkenvimage.o
HOSTCC tools/mkimage.o
tools/fit_image.c: In function ‘fit_handle_file’:
tools/fit_image.c:74:3: error: ‘destfd’ undeclared (first use in this
function) destfd = mmap_fdt(params->cmdname, params->keydest,
tools/fit_image.c:74:3: note: each undeclared identifier is reported only
once for each function it appears in
tools/fit_image.c:75:8: error: ‘dest_blob’ undeclared (first use in this
function) &dest_blob, &sbuf, 1);
^
tools/fit_image.c:75:20: error: ‘sbuf’ undeclared (first use in this
function)
&dest_blob, &sbuf, 1);
^
tools/fit_image.c:78:3: error: ‘destfd_size’ undeclared (first use in this
function)
destfd_size = sbuf.st_size;
^
tools/fit_image.c:81:2: error: ‘tfd’ undeclared (first use in this function)
tfd = mmap_fdt(params->cmdname, tmpfile, &ptr, &sbuf, 1);
^
tools/fit_image.c:81:44: error: ‘ptr’ undeclared (first use in this
function)
tfd = mmap_fdt(params->cmdname, tmpfile, &ptr, &sbuf, 1);
^
tools/fit_image.c:98:3: error: label ‘err_add_timestamp’ used but not
defined
goto err_add_timestamp;
^
tools/fit_image.c:91:3: error: label ‘err_add_hashes’ used but not defined
goto err_add_hashes;
^
tools/fit_image.c:83:3: error: label ‘err_mmap’ used but not defined
goto err_mmap;
^
tools/fit_image.c:77:4: error: label ‘err_keydest’ used but not defined
goto err_keydest;
^
tools/fit_image.c:42:6: warning: unused variable ‘ret’ [-Wunused-variable]
int ret;
^
tools/fit_image.c:41:9: warning: unused variable ‘size_inc’
[-Wunused-variable]
size_t size_inc;
^
make[1]: *** [tools/fit_image.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [tools] Error 2
Sorry for deleting the previous messages. U-boot mailing list is rejecting
my emails If I include them
Thanks,
Harsha
--
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
