From: Fabio Estevam <fabio.este...@nxp.com>
There is no need call setup_display() from SPL code, so move it to
board_init(), which executes only in U-Boot proper.
Reported-by: Stefano Babic <sba...@denx.de>
Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
---
board/toradex/colibri_imx6/colibri_imx6.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c
b/board/toradex/colibri_imx6/colibri_imx6.c
index 756e3f3..a2a4214 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -630,9 +630,6 @@ int board_early_init_f(void)
ARRAY_SIZE(pwr_intb_pads));
setup_iomux_uart();
-#if defined(CONFIG_VIDEO_IPUV3)
- setup_display();
-#endif
return 0;
}
@@ -653,6 +650,10 @@ int board_init(void)
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
+
#ifdef CONFIG_TDX_CMD_IMX_MFGR
(void) pmic_init();
#endif
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
