Hi
I tested this together with Anatolij's patch [1] on a Colibri iMX6. Both with the SPL and non SPL config the behaviour of the graphical output is as expected. Tested-by: Max Krummenacher <max.krummenac...@toradex.com> Thanks Fabio. Max [1] http://patchwork.ozlabs.org/patch/806755 ________________________________ Von: Fabio Estevam <feste...@gmail.com> Gesendet: Samstag, 23. September 2017 04:45:33 An: sba...@denx.de Cc: u-boot@lists.denx.de; ag...@denx.de; Max Krummenacher; Fabio Estevam Betreff: [PATCH 6/6] colibri_imx6: Avoid calling setup_display() from SPL code From: Fabio Estevam <fabio.este...@nxp.com> There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sba...@denx.de> Signed-off-by: Fabio Estevam <fabio.este...@nxp.com> --- board/toradex/colibri_imx6/colibri_imx6.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index 756e3f3..a2a4214 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -630,9 +630,6 @@ int board_early_init_f(void) ARRAY_SIZE(pwr_intb_pads)); setup_iomux_uart(); -#if defined(CONFIG_VIDEO_IPUV3) - setup_display(); -#endif return 0; } @@ -653,6 +650,10 @@ int board_init(void) setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc); +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + #ifdef CONFIG_TDX_CMD_IMX_MFGR (void) pmic_init(); #endif -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot