[PATCH 11/13] imx8mp: Set default SNSR25C for TMU probe1

[Peng Fan]

From: Ye Li <ye...@nxp.com>

So far u-boot only load SNSR25C for TMU main probe (probe 0). However,
kernel enables two probes. So it also needs to set default SNSR25C of
TCALIV1 for blank samples.

Reviewed-by: Peng Fan <peng....@nxp.com>
Signed-off-by: Ye Li <ye...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
 arch/arm/mach-imx/imx8m/soc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index adb444b240..c1e0f01f90 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -443,7 +443,9 @@ void imx_tmu_arch_init(void *reg_base)
            !fuse->ana_trim4 && !fuse2->ana_trim5) {
                /* Use a default 25C binary codes */
                tca25[0] = 1596;
+               tca25[1] = 1596;
                writel(tca25[0], (ulong)reg_base + 0x30);
+               writel(tca25[1], (ulong)reg_base + 0x34);
                return;
        }
 
-- 
2.16.4